Introducing SForm
Our primary objective is to minimize environmental impact.
We aim to divert at least 85% of Perth’s treated wooden concrete formwork from landfills. Introducing a groundbreaking solution, SForm, we revolutionize formwork in sustainable construction. SForm disrupts the industry by offering 100% recyclable Polypropylene sheets made from recycled material, paving the way for a greener and more responsible approach to formwork solutions.
SForm has been developed, focussing on the problems and disadvantages of timber products in the construction industry. The lifespan of timber-based formwork panels is reduced considerably due to external mechanical loads and the impact of water, chemicals, stress and temperature.
It results in a large amount of hazardous waste.
Why SForm is Disrupting the Conventional Plywood Formwork Practice
Reusable
The times of reuse can reach more than 100 times, long service life.
Facility Conservation
PP hollow board doesn’t absorb water and does not require special care or storage.
Smooth Concrete Surface
Smooth and touch surfaces provide a high-quality concrete surface finish. No need for plaster.
Cost Reduction
More than 100 reuses and no oil or agent expense, resulting in low cost. Reduce 20% labour cost than plywood.
Good Toughness
High strength, high hardness, impact resistance, wear resistance.
Demolding Easily
Demolding is convenient, quick and safe without release agent. Improves construction schedule efficiently.
High Versatility
Can be adapted to a wide range of project requirements and specifications.
Eco Friendly
Environmental protection and energy saving, no pollution, it’s a green product.
Recyclable
100% recyclable, that can greatly reduce the project’s carbon footprint compared with wooden and steel formwork.
No-Brainer!
Material Comparison
| Performance | SForm | Modular Plastic Formwork | Plywood | Metal Formwork |
|---|---|---|---|---|
| Water Resistance | Good | Good | No | No |
| Corrosion Resistance | Good | Good | No | No |
| Tenacity | Good | Bad | – | – |
| Impact Strength | High | Easily broken | Poor | High |
| After Absorbing Water | No deformed | No deformed | Deformed | No Deformed |
| Release Agent | No need | No need | Need | Need |
| Weight (kg/sq) | 7.75 | 10 | 7.2 | |
| Recycle | ✓ | ✓ | – | – |
| Bearing Capacity | High | Bad | Normal | High |
| Eco Friendly | ✓ | ✓ | – | – |
| Cost of Use | Low | Mid | Higher | Higher |
| Reusable Time | Over 100 | 20–30 | 3–6 | 100 |
SForm Sizes
| Size | Thickness | Weight/PC |
|---|---|---|
| 1220*2440mm | 12mm | 23kg |
| 1220*2440mm | 15mm | 27kg |
| 1220*2440mm | 18mm | 32kg |
| 1220*2440mm | 20mm | 36kg |